Not only can low water pressure be annoying, but it can also interfere with daily activities like dishwashing and showering and potentially damage your appliances. In order to fix low water pressure and resume regular water flow, it is essential to understand its causes and remedies. Everything you need to comprehend about low water pressure and how to treat it is provided here.
Mineral Buildup in Pipes and Older Plumbing:
Particularly if you have hard water, minerals like calcium and magnesium can gradually collect inside your pipes. Reduced pressure results from this buildup, which limits the water’s flow. As more minerals build up over time, the issue usually gets worse.
If the plumbing in your house is older, particularly the galvanized steel pipes, the mineral deposit can be too strong to remove. In this instance, contemporary materials like copper or PEX can be used to replace the pipes and greatly increase water pressure. Even though this is a more intrusive and costly remedy, older homes with persistent low water pressure problems frequently need it.
Leaky Pipes:
Water pressure can be greatly decreased by plumbing system leaks. The amount of water available at the point of use is decreased as water intended for your faucet or showerhead escapes through the leaks. If leaks are not fixed right away, they may potentially result in more significant problems, including mould growth and water damage.
Start by looking for leaks in your house. Inspect your walls, ceilings, and floors for any moisture areas, and note any sudden spikes in your water usage. Consider employing a plumber like https://www.handymansingapore.net/plumbing-services/ to do a more in-depth investigation if you think there may be a leak but cannot locate its cause. Leaks can be quickly fixed to restore water pressure and stop additional harm.
Inadequate Pressure Regulator:
A pressure regulator is a common home appliance that keeps water pressure within a safe range. The water pressure in your entire house may suddenly drop if the regulator malfunctions. This is especially typical in older homes with plumbing systems that are getting outdated.
Most hardware stores sell water pressure gauges, which you may use to test the pressure regulator if you think it’s the source of the problem. Turn on the water and attach the gauge to an outdoor faucet. In the event that the measurement is noticeably below the suggested pressure, which is typically between 40 and 60 psi, a professional regulator adjustment or replacement may be necessary.
Problems with Your Municipal Water Supply:
Occasionally, the issue is related to your municipal water supply. Water pressure may momentarily drop due to maintenance duties, pipe breakage, or increased local demand. It’s probably a problem with the local water supply if your neighbours have similar problems.
Contact your local water department to find out about any ongoing repairs or problems in your region if you believe the issue is with the municipal water supply. Regretfully, your only option in this situation is to wait for the problem to be fixed. To raise the pressure in your house momentarily, you can think about installing a water pressure booster.
Flush the Water Heater:
Sediment accumulation in your water heater, especially in hot water, can also impact water pressure. These particles can be eliminated, and normal pressure can be restored by flushing the water heater. If you’re not sure how to do something securely, make sure you follow the manufacturer’s instructions or Contact LS Handyman to get professional advice.